Bonded Tube Mounts - 44000 Mount Series

Rugged, low profile, high capacity mounts for vibration and shock protection. Recommended for use with off-road equipment, trucks, construction equipment and power generation equipment.
  • Uses the same installation hardware as the 22000 series mounts.
  • Available in a full range of load ratings and sizes.
  • Symmetrical design prevents installation error.
  • Axial-to-Radial stiffness 4:1
  • Available in Neoprene or Natural Rubber for most environments.
  • Fail-safe when used with snubbing washer

Features

  • Improved durability and service life.
  • Integrated metal flanges enable faster installation and provide lower cost because the mounting hole does not require deburring or chamferring.
  • Accommodates alternative support plate thicknesses by varying tube length (Contact Barry Engineering for specifics on this feature).
  • Parts are color coded for ease of identification.

Benefits

  • Economical
  • Bonded construction provides constant performance characteristics
  • Overlapping load ranges

Load Range

  • 5 sizes with 25 load ratings to 4,560 lbs. per isolator

Applications

  • Truck, bus and marine engines
  • Generators
  • HVAC equipment
  • Electronic equipment
  • Truck cabs
  • Machinery, pumps & compressors

Environmental Data

  • -20° F to +180° F (-30 C to +82° C) and is resistant to oils, most solvents and ozone.
  • Natural rubber has an operating temperature range of -40° F to +180° F (-40 C to +82° C)
  • Special elastomers and finishes are available for applications in severe environments.
NATURAL FREQUENCY 8-18 hz with 12-15 hz optimum
TRANSMISSIBILITY AT RESONANCE 8:1
RESILIENT ELEMENT Neoprene or Natural Rubber
STANDARD MATERIALS Low carbon steel plate and sintered metal tube
WEIGHT See dimensional drawings
 
click below for more info

44000