All Elastomer Isolators - Ball Mount Series

Low cost, compact, all elastomer mounts for vibration and noise control.

Barry Ball Mount Series Isolators are miniature, low-cost isolators that provide medium natural frequency vibration isolation for precision equipment, electronics and office equipment.

Features

  • All elastomer isolators
  • Fail-safe when installed with, ordinary nuts & washers
  • Wide load range ratings
  • Offer a wide variety of installation options

Benefits

  • Provide low frequency vibration isolation
  • Effective noise isolators
  • Will not bottom out under light shock loadings

Load Range

  • Series 7110 = 3 load ratings to 2 lbs. per isolator
  • Series 275 = 5 load ratings to 3.2 lbs. per isolator
  • Series 302 and 372 = 4 load ratings to 9 lbs. per isolator

Applications

  • Electromechanical equipment
  • Medical equipment
  • Appliances
  • Office equipment
  • Other precision applications

Environmental Data

  • Neoprene elastomer has an operating temperature range of -40°F to +180°F (-40°C to +83°C) and is resistant to oil and ozone.
  • Silicone elastomer has an operating temperature range of -67°F to +300°F (-55°C to +150°C).



Ball mounts on UAV helicopter isolate camera platform from propulsion vibration.

NATURAL FREQUENCY 10 - 20 Hertz
TRANSMISSIBILITY AT RESONANCE 10 (Neoprene)
4.0 (Silicone)
RESILIENT ELEMENT Neoprene or Hi-damp silicone
STANDARD MATERIALS none
WEIGHT See load range table

Installation    Load Range

click below for more info

275    372    302    7110