Dimensions

INDUSTRIAL CONICAL MOUNT SERIES SNUBBING WASHER

The use of snubbing washers is recommended to ensure proper static and dynamic loading of the isolator and retention of suspended equipment under severe shock environments

Snubbing washers are ordered by separate part numbers as shown in the table below. The standard material is low-carbon steel and the standard finish is zinc plate. Other materials and finishes are available upon request.

Part # Head Washer
Part #
Part Dimensions (inches) Tail Washer
Part #
Part Dimensions
A B C A B C
27327 9810276-05804 2.25 0.52 0.125 9810276-05804 2.25 0.52 0.125
27328 9810276-05804 2.25 0.52 0.125 9810276-05804 2.25 0.52 0.125
26748 9810276-07804 2.50 0.64 0.125 9810276-06804 2.25 0.64 0.125
26749 9810276-12804 4.60 0.64 0.25 9810276-10804 3.50 0.64 0.19
27595 9810276-12804 4.60 0.64 0.25 9810276-10804 3.50 0.64 0.19