Dimensions

HR MOUNT SERIES SNUBBING WASHER

The use of snubbing washers is recommended to ensure proper static and dynamic loading of the isolator and retention of suspended equipment under severe shock environments

Snubbing washers are ordered by separate part numbers as shown in the table below. The standard material is low-carbon steel and the standard finish is zinc plate. Other materials and finishes are available upon request.

Size "A" Dia. "B" Dia. "C" Part #
25453 2.00 .45 .125 R18733-1
25641 2.13 .532 .134 9810145-02804

Close Window