Machinery Mounts - SLM Series

Low-profile, high capacity mounts for vibration and shock protection.

 

Barry SLM Series Mounts are pneumatic elastomeric mounts, ideal for applications requiring higher deflection isolators. The SLM's mechanical bond design incorporates a positive locking system to ensure performance and safe operation.

Features

  • Air spring isolator with integral heavy wall construction
  • Deflection transfers shock to outer wall
  • Will not bottom out
  • Continued support & isolation even with no air pressure

Benefits

  • Combined resiliency and air prevents high static deflection, drift or permanent set
  • Extends machinery life
  • Wide load range available
  • Low maintenance

Load Range

  • 8 load ratings up to 19,200 lbs. per isolator

Applications

  • Industrial equipment, tools and machinery
  • CMM machinery
  • Forging hammers
  • Air compressors

 

SLM 48 Mounts These SLM 48 mounts isolate the vibration from the blower package to the floor.

Environmental Data

  • Neoprene elastomer has an operating temperature range of -20°F to +180°F (-30°C to +180°C) and is resistant to oils, most solvents and ozone.
NATURAL FREQUENCY 3 - 5 Hertz (10 Hz. unpressurized)
TRANSMISSIBILITY AT RESONANCE 8:1
RESILIENT ELEMENT Air and neoprene diaphragm
STANDARD MATERIALS Steel & aluminum
WEIGHT See table
click below for more info

SLM  |Instalation